Metal Finishing Guide Book


Issue link:

Contents of this Issue


Page 288 of 843

Typical formulations for copper fluoborate baths are given in Table XI. Maintenance and Control Contaminants Organic contaminants can affect the deposit appearance/uniformity and mechanical properties, especially ductility. These can be removed by carbon treatment. Cellulose filter aids, free of silica, can be used. These baths are often carbon filtered continuously. Lead is the only common metallic contaminant that causes problems, and it can be precipitated with sulfuric acid. Additives Normally, no organic additives are used. Molasses can harden deposits and minimize edge effects. Some of the same additives (e.g., acetyl cyanamide) used for copper sulfate baths can also be used with the fluoborate formulations. 281

Articles in this issue

view archives of Metal Finishing Guide Book - 2013