Metal Finishing Guide Book

2013

Issue link: https://metalfinishing.epubxp.com/i/218436

Contents of this Issue

Navigation

Page 675 of 843

40% to 60% solids from a hydrocyclone. The major downside of this is, as previously mentioned, the high equipment cost. A fully automatic system will cost upwards of $35,000, as compared to the $15,000 for a hydrocyclone. Since these centrifugal-type systems function by pulling solids directly from the booth water, it is vital to maintain uniformity of the water through agitation and circulation. To assure complete agitation, many of these centrifugal systems are packaged with booth agitation equipment, which may include some type of tank bottom sprayers. Since polymeric detackifiers tend to settle out in still water, the addition of bottom circulation may enhance the operation of the chemicals, not only with centrifugal systems but in all operations. Depending on the method chosen and its efficiency, the system water can be virtually free of contaminants after treatment. With an efficient method of solids removal, the water can be reused in the booth for sometime, conserving water usage and reducing disposal costs. The selection of the chemical treatment program and sludge removal system is dependent upon the type of paint, type of booth, and the money availFig. 4. Centrifuge system for sludge dewatering. able. Virtually any level of water quality is achievable, given that capital is available; for example, distillation equipment can be purchased for complete solvent removal from water and infrared drying systems are available to reduce paint sludge to a dry powder to minimize the cost of disposal. Most companies, however, do not have unlimited capital to spend on paint booths or the related products and equipment for water clean up. Using the information provided here and an understanding of the particular system in question, an end user should be able to pick the right chemical and mechanical means to minimize the water pollutants coming from the paint shop. Doing so will reduce overall operating costs, reduce water consumption, and help in conserving one of the most important natural resources. 664

Articles in this issue

view archives of Metal Finishing Guide Book - 2013