Metal Finishing Guide Book

2013

Issue link: https://metalfinishing.epubxp.com/i/218436

Contents of this Issue

Navigation

Page 783 of 843

Fig. 1. Clearances required for spraying with (a) and without (b) exhaust fan interlock. the authority having jurisdiction may be a regional official, such as a fire chief or marshall, building or electrical inspector, fire prevention bureau inspector, or labor or health department inspector. For insurance purposes, the authority may be an insurance inspector or representative of a rating bureau. Greater environmental concern has also led to increasing involvement by new agencies having jurisdiction. There are many agencies that dictate compliance. Depending on state and region, one or more of the following federal state and local agencies may play a part in approving a new booth installation. Federal Agencies 770 Fig. 2. Clearances required for Class I or II, Division 2 locations adjacent to openings in an enclosed spray booth or room.

Articles in this issue

view archives of Metal Finishing Guide Book - 2013