Metal Finishing Guide Book

2011-2012 Surface Finishing Guidebook

Issue link: https://metalfinishing.epubxp.com/i/49721

Contents of this Issue

Navigation

Page 675 of 707

neering Chromium Coatings on Ferrous Substrates ASTM-B921-02—Standard Specification for Non-hexavalent Chromium Con- version Coatings on Aluminum and Aluminum Alloys MIL-C-20218F NOT 1—This specification covers porous, electrodeposited chromium plating applied to surfaces where a lubri- cating film must be sustained, such as cylinder bores. MIL-DTL-14538D NOT 1—Chromium Plating, Black (Electrodeposited). Generally applied to steels but may be used as a plating for other metals such as brass, copper, iron, and chromium. MIL-DTL-23422F—Chromium Plating (Electrodesposited) CLEANING & SURFACE PREPARATION AMS1377—Remover for Paint Epoxy and Polyurethane Paint System Non- Chlorinated Solvent AMS1375B—Remover for Paint, Epoxy and Polyurethane Paint Systems AMS1374A—Remover for Polyurethane/Epoxy Paint Alkaline, Hot-Tank Type AMS1385A—Compound, Hot Carbon and Paint Remover for Aircraft Tur- bine Engine Components AMS2480—Phosphate Treatment Paint Base AMSC27725—Coating, Corrosion Preventative for Aircraft Integral Fuel Tanks AMSC83231A—Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts AMSC83445A—Coating System: Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective AMSR81903—Acid Activated Remover for Amine-Cured Epoxy Coating Sys tems AMS1388A—Remover for Temporary Coating Alkaline Type, Water Base AMS1376B—Remover for Epoxy Paint Acid-Type, Thickened AMS3167—Solvents, Wipe for Cleaning Prior to Primer & Topcoat AS7109/4—NADCAP Requirements for Stripping of Coated Material AMSP38336—Primer Coating, Inorganic, Zinc Dust Pigmented, Self-Curing, for Steel Surfaces ASTM-A967-05el—Standard Specification for Chemical Passivation Treat- ments for Stainless Steel Parts ASTM-B322-99(2004)—Standard Guide for Cleaning Metals Prior to Plating ASTM-B851-04—Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish ASTM-D7055-04—Standard Practice for Preparation (by Abrasive Blast Clean- ing) of Hot-Rolled Carbon Steel Panels to Test Coatings DOD-P-15328D(1) NOT 1—Primer, Pretreatment for Metal Surfaces MIL-B-23958A(1)—Metal Brightening for Aircraft (Brush, Cleaning) MIL-C-8514C(1)—Coating Compound Metal Pretreatment Resin Acid MIL-C-43616C(2)—Cleaning Compounds Aircraft Surface MIL-C-46487 NOT2—Cleaning & Preparation, Organic Coatings MIL-DTL-053022C—Primer, Epoxy Coating (Lead, Chromate Free) MIL-P-53022B—Primer: Epoxy Coating (Chromate free) 674

Articles in this issue

view archives of Metal Finishing Guide Book - 2011-2012 Surface Finishing Guidebook