Metal Finishing Guide Book


Issue link:

Contents of this Issue


Page 13 of 903

Deburring: Burrs are removed, as if numerous little files were grinding on the part (Fig. 4). Radiusing: Sharp edges on the parts are ground off and transformed into smooth, round contours. Surface smoothing: ���Peaks��� are ground off creating a smooth surface. Polishing: A continuation of the smoothing process��� decorative and functional surfaces are polished to a high gloss finish with extremely low Ra values (Fig. 5). Ball burnishing/ball polishing: Polishing of mainly aluminum and stainless steel parts with media made from stainless steel. Degreasing: Oily, greasy parts (e.g., stampings) are cleaned (degreased) and at the same time finished (deburred, radiused, etc.). Surface cleaning: Intensive cleaning of dirty parts (e.g., descaling, derusting) (Fig. 6). 12 media. Selection of the right media is key to the success of any surface finishing process. Hopefully, the information to follow will help provide some pointers toward the right media selection. A VERSATILE TECHNOLOGY FOR MANY FINISHING APPLICATIONS Mechanical surface finishing, generally referred to as ���mass finishing,��� offers a wide range of finishing solutions. While the removal of burrs is the most commonly known application, mass finishing offers many other finishing solutions, of which the most important ones are: INTERACTION OF VARIOUS MASS FINISHING COMPONENTS Frequently, mass finishing is considered a ���low-tech��� technology that is noisy, dirty, and wet. And many users do not pay enough attention to selecting the right components required to optimize their finishing operation. The results of such negligence are usually high finishing cost and a high scrap rate usually requiring a lot of rework. All this could be easily prevented, if the users would pay a bit more attention to the optimum interaction of the various components involved in any mass finishing process (Table 1): Figure 7 shows an example of a vibratory mass finisher. VIBRATORY FINISHING MEDIA: A LARGE VARIETY FROM WHICH TO CHOOSE In the ���old days,��� when the first mass finishing methods were developed, media consisted of crushed grinding wheels, river pebbles, and slag. Over the last few decades, mass finishing media evolved into a high-

Articles in this issue

view archives of Metal Finishing Guide Book - 2012-2013