Metal Finishing Guide Book

2012-2013

Issue link: https://metalfinishing.epubxp.com/i/98750

Contents of this Issue

Navigation

Page 390 of 903

of Defense, Washington, D.C., April 8, 2009. 6. MIL-A-8625F, Military Specification, Anodic Coatings for Aluminum and Aluminum Alloys, Department of Defense, 10 September 1993. 7. ASTM B117, Standard Test Method for Operating Salt Spray (Fog) Testing Apparatus, ASTM International, West Conshohocken, PA. 8. Federal Test Method Standard 141, Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing, Method 6301, Adhesion (Wet) Tape Test 9. ASTM B137, Standard Test Method for Measurement of Coating Mass per Unit Area on Anodically Coated Aluminum, ASTM International, West Conshohocken, PA. 10. ASTM D3359, Standard Test Methods for Measuring Adhesion by Tape Test, Method B, Cross-Cut Tape Test, ASTM International, West Conshohocken, PA. 11. L. Hao and B. Cheng, ���Sealing Processes of Anodic Coatings ��� Past, Present, and Future,��� Metal Finishing, Elsevier Inc., December 2000, pp. 818. 12. T. Westre, ���Performance Results for Sealed Type III Anodic Coatings,��� SUR/FIN 2000, June 2000. 13. Southern Aluminum Finishing website: http://www.saf.com/content.php?action=showPage&pid=69&cat_id=12 14. E. Brooman, ���Corrosion Protection of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Cadmium, Part I & Part II,��� Metal Finishing, Elsevier Inc., Part I April 2000, Part II June 2000. 15. M. Klingenberg et al., ���Update on Developments in Cr-free Coatings for Aerospace Applications,��� SUR/FIN 2008, June 2008. 16. BAC 5884, Anodizing of Aluminum Alloys, Boeing Process Specification, April 12, 1995. 17. J. Hogue and J. French, Evaluation of the Effects of Contamination by Silicates of Anodizing Seal Water, Final report for Contract Number DAAJ0173C0378, July 1973. 18. R. Straw, ���USAF Nickel Plating Issues,��� presentation to SERDP Pollution Prevention Technology Thrust Area Working Group (March 1999). 19. C. Long, ���Update on OSD���s Emerging Contaminants Program,��� Air Force Restoration and Technology Transfer Workshop, March 2011. 20. Final Report, Subtask 35G-01: Alternatives to Sodium Dichromate Sealers, Phase II, General Service Administration Contract GS-23F-0061L, 2004. 21. Final Report, Non-Chromate Conversion Coatings and Sealers for Aluminum Alloys, Strategic Environmental Research and Development Program, Project number PP-673, 2000. 22. M. Zemanova and M. Chovancova, ���New Approaches for Sealing Anodic Coatings,��� Metal Finishing, Elsevier Inc., New York, October 2005, pp. 3334. 23. A. Kuhn, ���PTFE Coating vs. Impregnation,��� Metal Finishing, Elsevier, Inc., New York, October 2005, pp. 35-38. 383

Articles in this issue

Links on this page

view archives of Metal Finishing Guide Book - 2012-2013