Metal Finishing Guide Book


Issue link:

Contents of this Issue


Page 411 of 903

plating processes, procedures & solutions UPDATE ON ALTERNATIVES FOR CADMIUM COATINGS ON MILITARY ELECTRICAL CONNECTORS BY ROB MASON, CEF, MARGO NEIDBALSON, AND MELISSA KLINGENBERG, PHD, CONCURRENT TECHNOLOGIES CORPORATION (CTC), JOHNSTOWN, PA., AND LARGO, FLA., AND PARMINDER KHABRA AND CARL HANDSY, UNITED STATES ARMY TANK-AUTOMOTIVE RESEARCH DEVELOPMENT AND ENGINEERING CENTER (TARDEC), WARREN, MICH. The metal finishing industry has been impacted by numerous regulatory actions related to the hazardous materials that are used in decorative and functional coating processes. These environmental regulations are applicable to both commercial and government facilities. In addition, Executive Order (EO) 13423, Strengthening Federal Environmental, Energy, and Transportation Management, and EO 13514, Federal Leadership in Environmental, Energy, and Economic Performance, were recently enacted. These EOs require government agencies to reduce the quantity of toxic and hazardous chemicals and materials acquired, used, or disposed. Cadmium and hexavalent chromium are very toxic and carcinogenic materials heavily regulated by the Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA). In addition, hexavalent chromium is among the three hazardous materials that the Department of Defense (DoD) has targeted for reduction to meet the requirements of the EO 13423. Due to the toxicity and carcinogenicity, as well as the numerous regulatory actions related to these materials, the U.S. Army Tank-automotive Research Development and Engineering Center (TARDEC) has been working to eliminate or reduce the use of cadmium and hexavalent chromium in ground vehicles and related systems. The National Defense Center for Energy and Environment (NDCEE), operated by Concurrent Technologies Corporation (CTC), has been tasked to support TARDEC���s activities in this area. Specifically, the protective shells of electrical connectors currently used in military ground systems are cadmium plated and then chromated with chromate conversion coatings (CCCs) to provide additional corrosion protection. The aforementioned regulatory concerns underscore a need to find alternatives to the currently used coating processes to reduce environmental and safety risks. However, the replacement of cadmium for any application is not a trivial task. Cadmium has been used as a protective coating for electrical connectors for many years because of the numerous properties that it imparts to the overall component. Key properties that cadmium coatings impart to electrical connector shells include: 1,2 ��� ��� ��� ��� 404 Ease of manufacturing Ease of repair Electrical conductivity Electromagnetic compatibility (EMC)/electromagnetic interference (EMI) effectiveness

Articles in this issue

view archives of Metal Finishing Guide Book - 2012-2013