Metal Finishing Guide Book

2012-2013

Issue link: https://metalfinishing.epubxp.com/i/98750

Contents of this Issue

Navigation

Page 485 of 903

A typical bath might contain from 50 to 100 g/L of chromic acid, and be run at about 95 to 105OF. There are two main processes, one using 40 V and a newer process using 20 V. The equipment needed is similar to that used in sulfuric acid processes. Oxalic acid is sometimes used as an anodizing electrolyte using similar equipment. This bath will produce films as thick as 2 mils without the use of very low temperatures and usually gives a gold or golden bronze color on most alloys. The typical concentration is from 3 to 10% oxalic acid at about 80 to 90OF, using a DC voltage of about 50 V. Phosphoric acid baths are used in the aircraft industry as a pretreatment for adhesive bonding. They are also very good treatments before plating onto aluminum. A typical bath might contain from 3 to 20% of phosphoric acid at about 90OF, with voltages as high as 60 V. SUMMARY Aluminum is a most versatile metal. It can be finished in a variety of ways. It can be made to resemble other metals, or can be finished to have a colorful as well as a hard, durable finish unique unto itself. Only the imagination limits the finish and colors possible with anodized aluminum. 478

Articles in this issue

view archives of Metal Finishing Guide Book - 2012-2013