Metal Finishing Guide Book

2012-2013

Issue link: https://metalfinishing.epubxp.com/i/98750

Contents of this Issue

Navigation

Page 835 of 903

Fig. 1. Clearances required for spraying with (a) and without (b) exhaust fan interlock. ty, the authority may be an official of a federal, state, or local agency. Or the authority having jurisdiction may be a regional official, such as a fire chief or marshall, building or electrical inspector, fire prevention bureau inspector, or labor or health department inspector. For insurance purposes, the authority may be an insurance inspector or representative of a rating bureau. Greater environmental concern has also led to increasing involvement by new agencies having jurisdiction. There are many agencies that dictate compliance. Depending on state and region, one or more of the following federal state and local agencies may play a part in approving a new booth installation. 822 Fig. 2. Clearances required for Class I or II, Division 2 locations adjacent to openings in an enclosed spray booth or room.

Articles in this issue

view archives of Metal Finishing Guide Book - 2012-2013